DIGIX pin code ?

[Gotti]

The Regard! beside me ресивер DIGIX program 711 want to alter by sawing on 911 but when programming resiver beside I ask pin code

[Gotti]

here is that he beside I write when loading the versions 911, write me answer in english
UPGRADE TOOL (V2.30) 22-MAR-2004 Patch
File open O.K.!
> Old version binary.
COM2 Connected !
-. Target loader version :L 202
-----------> Front :: 74HC164 used (connector: 14pin)
-----------> Target 2M Flash.
-----------> Target SST FLASH-2M.
Connect Success
//==================================================
// FileInfo: DSC-911UZ, H/W(13.42.65), S/W(02.00.00)
// Target: L 202, u-C[0] , FLS[2M], DSC-711AN, H/W(13.03.65), S/W(01.05.01)
//==================================================
Target Model Mismatch : DSC-711AN
Upgrade Fail
STB normal start.
[ Upgrade mode. ]

UPGRADE TOOL (V2.30) 22-MAR-2004 Patch
File open O.K.!
> Old version binary.

COM2 Off !!! ("Enter" key to reconnect.)

[GeZeGeN]

Problem,
H/W(13.03.65),
H/W(13.42.65),

[RegdaR]

Receiver and software H/W must be same.

[Gotti]

but on what lace trim me to alter by sawing reciver ?

[musta]

@Gotti;
you must upload to 13.03.65 firmware yours receiver and don't lace trim digix911u firmwares.find to DSC-711AN, H/W(13.03.65) firmware for DSC-711AN.
don't forget; wrong firmware ,kill to flash.

[Gotti]

People help me to find lace trim for this reciver